Best Pull On Work Boots – Top 5 Recommendations

Pull-on work boots have become trendy footwear for many workers nowadays. Not only are they classy, but they are also quite comfortable and have excellent protective abilities.

But who should wear these boots? While everyone can wear pull-on work boots, they are most ideal as protective footwear if you work in construction or in the field.

When identifying a good pair of pull-on work boots, there are a few considerations to keep in mind. The best pull-on work boots should offer you excellent durability, safety, comfort, quality, and should be reasonably priced.

Given the variety of work boot types and designs at your disposal, it won't be easy to identify what works best for you. To eliminate the headache and confusion that you are likely to face in the market, listed below are among the best pull on work boots worth trying out in 2019.

Comparison Chart

Caterpillar Men’s Revolver Pull-On Soft Toe Boot

ROCKROOSTER Work Boots for Men

Irish Setter Work Men’s 83912 Marshall 11″ Pull-On Work Boot

Ariat Men’s Groundbreaker Pull-On Work Boot

Carhartt Men’s 11″ Wellington Pull-On Work Boot

Best Pull On Work Boot Reviews

Caterpillar Men's Revolver Pull-On Soft Toe Boot 

Caterpillar's reputation goes beyond the production of quality machinery and farm equipment. Their footwear products are excellent! For instance, these Caterpillar Men's Revolver Pull-On soft tie boots offer a great combination of comfort and protective features.


Made in the US, these Caterpillar pull-on boots are durable boots that will serve you well, thanks to their sturdy and full-coverage construction. They feature a Goodyear® welt construction for durability and long-lasting service.

For maximum safety and comfort, these boots feature a full-grain leather construction. Thanks to its stronger fibers, this leather material makes the boots extremely strong and durable. Also, the natural quality of leather makes it breathable and thus you won't have to worry about excessive moisture due to prolonged contact.

These Caterpillar Men's Revolver Pull-on soft tie boots also feature a durable rubber sole. Wearing these boots while in the office or out in the field will give you complete support and you can enjoy long hours of work with total comfort. With these boots on, you don't have to worry about heel blisters.

The dual loop on these boots adds to more comfort by keeping your boots well-fitting. The boots have a pull-on design with dual-side tabs that makes it easier to take on and off. The steel shank is added for increased support.

The boots are compact and lightweight so you can work for more extended periods without becoming tired. A single boot weighs 1lb 15 oz. However, these measurements may differ depending on the size of the boots.

The boot's opening measures around 14” and holds onto your calves firmly. Whether you work in construction or the farm, dust, debris, water, or any other dirt particles won't find a way inside the boots.

The outsole of these Caterpillar pull-on boots is made of a durable and sturdy oil and slip-resistant material. Whether you can work in any oily, watery, or muddy environment, you are covered.


  • Full-grain leather construction
  • Slip and oil-resistant outsole
  • Weighs just 1lb, single boot
  • A rubber sole for added comfort
  • Goodyear® welt construction
  • The boots are stress-free to put in and out


  • The leather material needs regular treatment

ROCKROOSTER Work Boots for Men

The Rockrooster work boots for men are suitable for you if you want classic yet excellent footwear. These boots are popular with welders thanks to their electrical Hazard protective sole.


These boots are made from high-quality PORON materials that feature a micro ban technology for increased consistency and reliability. Furthermore, the boots are sturdy and will last you a lifetime.

The boots also feature a steel toecap to safeguard your toes and feet. The toecap is verified safe by the American Standard ASTM F2413-11. This feature makes the boots ideal for farmers, hikers, welders, firefighters, mechanics, security, and other heavy-duty workers.

The cool Max technology has excellent temperature control, wicking control, and quick-drying effects that will keep your warm, fresh, and dry throughout the day. The wicking moisture feature allows you to work in scorching environments thanks to its sweat and moisture-absorbing abilities. This feature also allows the boots to dry quickly after wash.

The soles are slip-resistant, therefore, convenient for use by factory, farm, and construction workers. The soles are made of rubber and thus durable and comfortable to use. They also have oil-resistant properties.

Another feature that makes these boots ideal for construction and factory workers is the static control technology. It keeps you safe from electric shock by releasing static charges into the ground. You can work in wet environments without fear of electrocution, bad odor, or your feet becoming wet.

The Rockrooster work boots for men also feature comfortable and durable insoles that have automatically contoured footbed cradles for maximum support so that you can work for extended periods of time in total comfort.

The full-grain/Nubuck leather makes these boots durable, stylish, comfortable, and reliable. The shoes are also easy to wear and take off.


  • Full-grain leather construction
  • Contoured footbed
  • PORON materials with micro-ban technology
  • Cool Max technology with temperature, winking, and quick dry control
  • A durable rubber sole
  • Slip and oil resistant
  • A static control system to protect against electricity


  • The size runs a little bit smaller


Irish Setter Work Men's 83912 Marshall 

The Irish Setter Work Men's 83912 Marshall is among the best pull-on work boots for any heavy-duty, factory, or construction worker. The boots are solidly built and can withstand rough and hard use.


These boots are made from 100% full-grain leather. The boots are designed to stay upright and don't sag even after prolonged use. The upper side of the boots is fully waterproof and resistant to oil, perspiration, and water stains.

The interior of the boots is fitted with Irish Setter’s patented UtraDry technology that has waterproof components. The technology also wicks away moisture and sweat inside the boots. This means that you can work all day long and enjoy dry and warm feet regardless of working in a hot environment.

The 11” pull-on steel toe is added to provide more protection for your toes, especially when working in heavy-duty environments. A removable polyurethane footbed is added for maximum comfort and support. The heels measure approximately 1.5” for added support and anti-slip components.

The outer side of the Irish Setter Work Men's 83912 Marshall is crafted with a durable and vibrant 100% rubber sole. This makes the boots durable and safe to wear in any environment. To clean, you can spray lukewarm water or care-wipe, and allow them to dry naturally. A non-scented soap is recommended when deep washing the boots.

The boots are lightweight thanks to the RPM Composite technology. This composite material significantly reduces the overall weight of the boots for added endurance and comfort. You can wear these boots confidently - they won't drain your energy even if you work for long hours.

The electric hazard protective feature of these boots makes it ideal for use in construction sites. The sole is engineered to reduce electrical hazards. The outsole is fitted with electrically energized parts for added protection. The outer sole is also heat-resistant to melting up to 475 degrees Fahrenheit.

These Irish boots have an opening pull-on design measuring approximately 15”. This is wide enough to provide a firm grip on your feet. As well, the boots are straightforward to wear and take off. They will keep your feet safe and fatigue-free throughout the day.


  • Slip-resistant
  • UltraDry Waterproofing system
  • RPM Composite technology to reduce boot weight
  • Rubber sole
  • Electrical hazard safe
  • 11” pull-on steel toe


  • Expensive

ARIAT Men's Groundbreaker Pull-on Steel Toe Work Boot 

The Ariat Men's Groundbreaker work boots are common footwear among working men thanks to their casual wear look, durability, safety, and lightweight nature.


The boots come with robust yet functional construction. The boots feature full-grain leather with a steel toe design for protection. The leather material is 100% natural therefore making the boots comfortable and durable. The boots also provide a safe and proper posture.

The breathable mesh lining is to thank for the dry and warm feet. The lining is fitted to absorb moisture and sweat, thereby preventing the development of blisters due to a build-up of heat inside the boots.

The 11.5” shaft provides ample space to fit and provide a comfortable grip around your feet. It also makes it easy and quick to wear and take off the boots. You can wear the boots throughout the day without experiencing any fatigue.

These Ariat Men's Groundbreaker work boots have a 90° heel for added support especially when hiking or working on unleveled grounds. As well, they prevent injuries and fatigue, especially if you work for long periods of time. The natural look of the boots creates a camouflage inclusion for usage in the woods and other outdoor activities.

The boots are ideal for use even in wet and heavy-duty environments thanks to their slip and oil resistant abilities. The boots also feature a dura-trend outsole making them resistant to barnyard acids. Also, the boots work perfectly in soggy and muddy areas.

These boots also feature a comfortable insole with a higher rebound for added support and protection against blisters caused by high-friction. The overall height of the boots provides support and stability that is needed for heavy-duty tasks and tasks such as riding and hiking.

The Ariat Men's Groundbreaker Pull-on Steel toe boots are tested and certified by the ASTM F2413-11 American Standard for protective toe cap footwear. You can, therefore, wear them with confidence.


  • Rounded steel toe
  • 90-degree heel
  • ASTM F2413-11 standard certified
  • Oil and slip-resistant
  • Two-row stitch pattern
  • Extra comfort insole
  • Full-grain leather construction
  • Breathable mesh lining


  • Costly

Carhartt Men's 11" Wellington Waterproof Steel Toe

Last on our list of the best pull on work boots is the Carhartt Men's 11” Wellington Waterproof Steel Toe. Besides the stunning appearance of these boots, they are durable and robust enough to protect you fully from anything that nature throws at you.


The boots feature 60% leather and 40% nylon construction. The boots offer good posture and a classic cowboy boot that are ideal for any work. Overall, the boot is large and will give your feet a comfortable grip.

These Carhartt boots have a good height size, measuring 11”. This makes the boots ideal for working in the field or construction sites. The shaft also offers maximum flexibility when walking around. You are fully covered from dirt, mud, sand, debris, and other dust particles. The shaft is also wide enough to allow for easy wear and take-off of the boots.

The solid steel toe of these boots offers added safety even when working on heavy-duty construction. You can, therefore, go to your job site with confidence that you'll be going back home without any injuries on your foot.

Another unique feature that you will enjoy with these boots is the 400 LiteFire insulation. The boots will keep your feet dry and warm during cold seasons. The storm defender waterproof feature makes the boots suitable for use around factories and construction sites with high water usage.

The Carhartt Men's 11” Wellington Waterproof Steel Toe boots also have a breathable protection feature. It keeps your feet not only warm but dry throughout the day. It is designed to prevent the build-up of moisture and bad odors inside the boots.

The synthetic sole of these boots is comfortable and resistant against other natural substances. The boots are also lightweight, so you don't have to worry about them draining all your working energy.


  • Storm defender waterproof
  • 60% leather and 40% nylon construction
  • 400 LiteFire insulation
  • Synthetic sole
  • Solid steel toe for protection
  • Wide shaft


  • Expensive

Final Verdict

Whether you are looking for boots to keep you warm or protect your feet from injury, all these boots will serve you perfectly. The Carhartt Men's 11” Wellington Waterproof Steel Toe Boots, Ariat Men's Groundbreaker Pull-On Steel toe work boots, and the Caterpillar Pull-On Boots are perfect if you are looking for warm or heavy-duty protective footwear.

On the other hand, if you work in heavy-duty environments with a lot of construction or welding, then go for the Irish Setter Work Men's 83912 Marshall Boots or the Rockrooster work boots. They have advanced features like being slip-resistant, waterproof, and having electronic hazard technology to protect you against electric shock.

Just check them out and then choose the one that suits you perfectly.

Leave a Comment: